You will need the following……
- 3 whole pallets and 1 with the blocks removed for the front
- 1 screwdriver or drill driver
- Stapler and Staples
- 2 Rachet Strap tie downs or rope
- Rope for fixing the Front
- 2 pieces of wood with 2 screws for holding rope at front and 4 wooden stakes
- Black plastic sheet or anything similar
Stand the 3 pallets together and fix at the rear with the 2 rachet straps or rope.
- Cut Plastic sheeting to fit inside pallets add plastic strips over the top edge and staple in place and cutout a strip for the front piece.
- Attach the wooden holders for the rope loop near the top, fix rope with loop to the side pallets near the top.
- Finish off with 4 wooden stakes 2 at the front at each side and the other 2 at the sides towards the front.
g.r.calder 